Service manual
• Power on
• Disks bound
1. If you have not already done so, launch Storage Utility from the K2Cong application.
2. As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
3. In Storage Utility, click Tools | Make New File System.
The Setting dialog box opens.
4. For the Real Time Input/Output (RTIO) rate, enter the value specied by your system design. If
you do not know this value, contact your Grass Valley representative.
5. Congure Windows Security as follows:
• If the K2 SAN is on a network Workgroup (not domain), do not select Windows Security .
• If the K2 SAN is on a network domain, you may select Windows Security.
NOTE: Only select Windows Security if the K2 SAN is on a domain. Never select Windows
Security if the K2 SAN is on a workgroup.
2013 07 20 K2 Installation and Service Manual 161
Conguring and licensing the K2 SAN