Service manual

Configure File System Server Configuration page - Redundant K2 SAN server B

This page checks on the conguration of the K2 Media Server in one of its main roles as a le

system server. The K2 Media Server also functions as a le system client, which is also checked

from this page. It is not necessary to bind RANKs or create a le system, since this task was

completed when you congured the previous K2 Media Server.

1. If desired, congure reference le generation.

2. Click Check.

3. Conrm a “… le copied…” message.

4. When the wizard reports that the conguration is correct, click Next.

5. Conrm messages about copying the le system conguration le to the other server.

If you get a “The V: will not be available until this device is rebooted…” message, you can safely

continue now and reboot later when instructed to do so.

The iSCSI Bridge Server Conguration page opens.