Service manual
Configure FTP Server Configuration page - Redundant K2 SAN NH server
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4, FTP Data Socket
Timeout = 60, and FTP Port = 21. Only qualied Grass Valley personnel should specify other values,
as these settings are intended for use only with custom systems designed by Grass Valley.
1. Select MXF export type as follows:
• 377M: Original SMPTE 377M style. Ensures compatibility with older products.
• 377-1: Newer SMPTE 377-1 style.
2. Click Next.
The Completing the Conguration Wizard page opens.
3. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
If you have other NH servers, congure them similarly. Then check the V: drive on each of your
NH servers.
Check the V: drive
Prerequisites:
• The K2 Media Server is congured
180 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN