Service manual

2. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is
usually not congured for RVIO.
3. Click Check.
4. When the wizard reports that the conguration is correct, click Next.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The FTP Server Conguration page opens.
Configure FTP Server Configuration page
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4, FTP Data Socket
Timeout = 60, and FTP Port = 21. Only qualied Grass Valley personnel should specify other values,
as these settings are intended for use only with custom systems designed by Grass Valley.
1. Select MXF export type as follows:
• 377M: Original SMPTE 377M style. Ensures compatibility with older products.
• 377-1: Newer SMPTE 377-1 style.
2. Click Next.
The Completing the Conguration Wizard page opens.
3. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
198 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN