Service manual

K2 Media Server
• Ethernet cables connected
• Fibre Channel cable connected
• Redundant servers connected by serial cable
• Software installed, as from the factory, including QuickTime 7
• MPIO software installed.
• Control network IP address assigned
• Power on for all servers
K2 RAID chassis
• Fibre Channel cable(s) connected
• Ethernet cable(s) connected
• Power on
K2 RAID Expansion chassis (optional)
• Fibre channel cable(s) connected
• Power on
Related Topics
Installing Multi-Path I/O Software on page 225
Defining a new K2 SAN
If you import a SiteCong system description le in which the SAN is dened, you do not need to
dene a new SAN. You can skip this task and instead start by conguring the rst K2 Media Server.
1. On the control point PC, open the K2Cong application.
A log on dialog box opens.
200 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN