Service manual

Disks bound
1. If you have not already done so, launch Storage Utility from the K2Cong application.
2. As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
3. In Storage Utility, click Tools | Make New File System.
The Setting dialog box opens.
4. For a Nearline system, enter zero as the Real Time Input/Output (RTIO) rate.
5. Leave Windows Security unchecked.
6. Click OK.
The Conguration File dialog box opens.
The conguration le for the media le system is displayed.
214 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN