Service manual

Configure File System Server Configuration page - NH server B
This page checks on the conguration of the K2 Media Server in one of its main roles as a le
system server. The K2 Media Server also functions as a le system client, which is also checked
from this page. It is not necessary to bind RANKs or create a le system, since this task was
completed when you congured the previous K2 Media Server.
1. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is
usually not congured for RVIO.
2. Click Check.
3. Conrm a “… le copied…” message.
4. When the wizard reports that the conguration is correct, click Next.
5. Conrm messages about copying the le system conguration le to the other server.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The iSCSI Bridge Server Conguration page opens.
220 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN