Service manual

SpecificationCharacteristic
10.92 lb. (4.95 kg)Weight
100-127 / 200-240 VACVoltage
Idle power: 49 W; Maximum power rating: 82 WPower
consumption
Operating: 32ºF to 131ºF (0ºC to 55ºC); Non-operating: -40ºF to 158ºF (-40ºC
to 70ºC)
Temperature
Operating: 15% to 95% @ 104ºF (40ºC)
15% to 95% @ 149ºF (65ºC)
Relative humidity:
(non-condensing)
Up to 10,000 ft. (3 km)Maximum altitude
K2 Media Server description
The central component of the K2 SAN is the K2 Media Server. The Dell PowerEdge R610 and
R620 are qualied as the platform for the K2 Media Server.
The following interfaces provide K2 SAN functionality with Dell PowerEdge R610:
• Two GigE ports on the motherboard. The R610 has four GigE ports, but only two are used.
• One iSCSI interface card. A port on this card is also referred to as a TOE (TCP/IP Ofoad
Engine).
• One Fibre Channel card.
The following interfaces provide K2 SAN functionality with Dell PowerEdge R620:
• Broadcom Dual Port 10GbE SFP+ with two 1GbE (TOE and iSCSI ofoad available on 10GbE
ports)
• Fibre channel adapter: Intel I350 Gigabit Controller, Intel X450-AT2 10Gigabit Controller.
• QLogic QLE8262 Dual-Port, 10Gbps Ethernet-to-PCIe
®
Converged Network Adapter.
K2 Media Server specifications
The K2 Media Server is built on a Dell PowerEdge R610 and R620 server platform. Specications
that are unique to it purpose as a K2 Media Server are listed in the following table. For a complete
list of specications, refer to Dell documentation.
2013 07 20 K2 Installation and Service Manual 253
Description of K2 SAN Devices