Service manual
NH K2 Media Server specifications
The NH K2 Media Server is built on a Dell PowerEdge R610 and R620 server platform. Specications
that are unique to it purpose as a K2 Media Server are listed in the following table. For a complete
list of specications, refer to Dell documentation.
Dell PowerEdge R610 server
SpecificationCharacteristic
Microsoft
®
Windows
®
Server 2003, Standard EditionOperating System
ATTO Celerity FC-81ENSingle-Channel 8Gb/s Fibre Channel PCIe 2.0 Host
Adapter for online systems
ATTO Celerity FC-82EN Dual-Channel 8Gb/s Fibre Channel PCIe 2.0 Host
Adapter for nearline systems.
Fibre Channel
Adapter
Two dual port embedded Broadcom NetXtreme II 5709c Gigabit Ethernet NIC
Intel
®
Single-port 10 Gigabit SFP+ Ethernet Server Adapter x520
Communications
1UForm Factor
Dell PowerEdge R620 server
SpecificationCharacteristic
Microsoft
®
Windows
®
Server 2008 R2 SP1, x64 (includes Hyper-V
®
v2)Operating System
Intel I350 Gigabit Controller, Intel X450-AT2 10Gigabit ControllerFibre Channel
Adapter
QLogic QLE8262 Dual-Port, 10Gbps Ethernet-to-PCIe
®
Converged Network
Adapter
iSCSI Adapter
Broadcom Dual Port 10GbE SFP+ with two 1GbE (TOE and iSCSI ofoad
available on 10GbE ports)
Communications
1UForm Factor
K2 RAID storage description
This section refers to K2 10Gv2 RAID storage devices.
The K2 RAID storage device is a high performance, high availability mass storage system. The
RAID chassis 8Gb/s host interface supports industry standard Fibre Channel technology. K2 RAID
is available with either SAS drives for online storage or SATA drives for nearline storage. There
are two types of chassis: one type has 2.5 inch drives, with a capacity of 24 drives; the other type
has 3.5 inch drives, with a capacity of 12 drives.
2013 07 20 K2 Installation and Service Manual 255
Description of K2 SAN Devices