Service manual

However, if a situation arises in which you want to purge the information in the conguration le
or otherwise control the rules for writing the K2Cong information to the Control Panel Service
host, you can do so as explained in this topic.
1. Make sure the GV STRATUS Core server is running.
2. Open the K2Cong application.
3. In the K2Cong application click STRATUS | Network Configuration and verify that the machine
that hosts the Control Panel Service is correctly congured. Typically this is the GV STRATUS
Core server.
4. Click STRATUS | Sync to Control Panel.
The Synch to STRATUS Control Panel dialog box opens.
5. Select the synchronization option as follows:
Overwrite the list... — This overwrites the K2Cong conguration le currently on the
Control Panel Service host. Any K2 SAN information currently in the le is lost and replaced
by the K2 SAN information currently in K2Cong. Take care when selecting this option,
especially if you previously congured a K2 SAN from a different instance of K2Cong.
This practice is not recommended, but if you are doing this, you could lose the information
from that other K2Cong instance.
Add to the list... — This is the same action that K2Cong does automatically when you add
a K2 SAN. The SAN's information is written to the conguration le on the Control Panel
Service host, replacing any information for that same K2 SAN that is already in the
conguration le. By selecting this option, you are triggering the same operation that would
take place if you removed a K2 SAN from K2Cong and then added the SAN back to
K2Cong.
6. Click Sync Now to write the K2 SAN information to the K2Cong le on the Control Panel
Service host.
7. Close the K2Cong application.
8. Open the GV STRATUS Control Panel application and click Tools | Core | K2 Storage | K2 SAN
Storage.
K2 SAN Storage settings open.
9. Click Refresh.
The Control Panel application reads the information from its local K2Cong le and updates
the list of K2 SANs.
270 K2 Installation and Service Manual 2013 07 20
Administering and maintaining the K2 SAN