Service manual
3. Congure the settings for the network as follows:
For control networkSetting...
Ethernet is required
Type
Control is required
Usage
None is required. This is true even on a redundant K2 SAN. (Only the
iSCSI network is redundant on a redundant K2 SAN.)
Redundancy
Control is recommended
Name
Unselected is required
Exclude from Host
Files
Selected is required
Managed
The rst (lowest) IP address in the range of IP addresses managed by
SiteCong. Required.
Base IP Address
The number of IP addresses in the range managed by SiteCong.
Required.
Number of Addresses
The network's subnet mask. Required.Subnet Mask
Additional network settings managed by SiteCong. Allowed.Gateway IP Address
Unselected is required. Related settings are disabled.
Unmanaged
Servers providing DNS for name resolution. Allowed.DNS Servers
Not allowedDefault Interface
Name Sufx
4. Click OK to save settings and close.
Modifying the FTP/streaming network
1. In the Network Configuration | Networks tree view, select the K2 SAN's Site node.
The networks under that node are displayed in the list view.
76 K2 Installation and Service Manual 2013 07 20
Planning and implementing a K2 SAN with SiteCong