Service manual
8. To modify planned settings, do the following:
a) Select the network settings and click Edit.
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
For network interface Control TeamSetting...
Control is required
Network
Static is recommended.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For basic SAN network interface Media Connection #1Setting...
iSCSI (non-Redundant) is required
Network
Static is required.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For redundant SAN network interface Media Connection #1Setting...
iSCSI (Primary Redundant) is required
Network
Static is required.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For redundant SAN network interface Media Connection #2Setting...
iSCSI (Secondary Redundant) is required
Network
Static is required.
Address Allocation
The IP address for this interface on the network. Required.IP Address
92 K2 Installation and Service Manual 2013 07 20
Planning and implementing a K2 SAN with SiteConî‚¿g