Service manual

7. To modify planned settings, do the following:
a) Select the network settings and click Edit.
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
For network interface Control ConnectionSetting...
Control is required
Network
Static is recommended.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For network interface FTP ConnectionSetting...
Streaming is required
Network
Static is required.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For basic SAN K2 Media Server any network interface of type iSCSISetting...
iSCSI (non-Redundant) is required
Network
Static is required.
Address Allocation
The IP address for this interface on the network. Required.IP Address
For redundant SAN K2 Media Server A any network interface of type
iSCSI
Setting...
iSCSI (Primary Redundant) is required
Network
Static is required.
Address Allocation
2013 07 20 K2 Installation and Service Manual 97
Planning and implementing a K2 SAN with SiteCong