Technical Guide

Table 23. PowerEdge R350 chassis dimensions (continued)
Drives Xa Xb Y Za Zb Zc
22.0 mm (0.86
inches)Without
bezel
Ear to PSU
handle
8 x 2.5-inch 482.0 mm (18.98
inches)
434.0 mm
(17.09 inches)
42.8 mm (1.7
inches)
35.64 mm
(1.40 inches)
With bezel
22.0 mm (0.86
inches)
Without bezel
483.82 mm
(19.04 inches)
Ear to rear wall
512.53 mm
(20.17 inches)
Ear to PSU
handle
NOTE: Zb is the nominal rear wall external surface where the system board I/O connectors reside.
Chassis weight
Table 24. PowerEdge R350 system weight
System configuration Maximum weight (with all drives/SSDs)
4 x 3.5-inch 13.6 kg (29.98 pound)
8 x 2.5-inch 36.3 kg (80.02 pound)
NIC port specifications
The PowerEdge R350 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) cards.
Table 25. NIC port specification for the system
Feature Specifications
LOM card 1 GB x 2
Video specifications
The [platform] supports [graphics cards]
Table 26. Video specifications for [platform]
Resolution Refresh Rate Horizontal
Frequency
Pixel Clock Rear Panel Front Panel DVO Display
Port
Appendix A. Additional specifications 49