CLI Guide

sa-cache Enter the keywords sa-cache to display the Source-Active
cache.
summary Enter the keyword summary to display an MSDP peer
summary.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ip msdp peer 100.1.1.1
Peer Addr: 100.1.1.1
Local Addr: 100.1.1.2(639) Connect Source: none
State: Established Up/Down Time: 00:00:08
Timers: KeepAlive 60 sec, Hold time 75 sec
SourceActive packet count (in/out): 0/0
SAs learned from this peer: 0
SA Filtering:
Input (S,G) filter: none
Output (S,G) filter: none
Dell#
Example (Sa-
cache)
Dell#show ip msdp sa-cache
MSDP Source-Active Cache - 1 entries
GroupAddr SourceAddr RPAddr LearnedFrom Expire
UpTime
224.1.1.1 172.21.220.10 172.21.3.254 172.21.3.254 102
00:02:52
Dell#
Example
(Summary)
Dell#show ip msdp summary
Peer Addr Local Addr State Source SA
Up/Down Description
5.5.5.32 6.6.6.32 Established Lo 32 20
00:07:17 Peer1
Dell#
Multicast Source Discovery Protocol (MSDP)
1007