CLI Guide

Network Mask: /24
Attached Router: 20.20.20.8
Attached Router: 20.20.20.9
Attached Router: 20.20.20.7
Network (Area 0.0.0.1)
LS age: 252
Options: (TOS-capability, No DC, E)
LS type: Network
Link State ID: 192.10.10.2
Advertising Router: 192.10.10.2
LS Seq Number: 0x80000007
Checksum: 0x4309
Length: 36
Network Mask: /24
Attached Router: 192.10.10.2
Attached Router: 20.20.20.1
Attached Router: 20.20.20.5
Dell#
Related
Commands
show ip ospf database — displays OSPF database information.
show ip ospf database nssa-external
Display NSSA-External (type 7) LSA information.
Syntax
show ip ospf database nssa-external [link-state-id] [adv-router
ip-address]
Parameters
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Open Shortest Path First (OSPFv2 and OSPFv3)
1095