CLI Guide

State Oper-State
test 16 16 0efc02 128
ACTIVE UP
cnatest 1003 1003 0efc03 128
ACTIVE UP
sitest 1004 1004 0efc04 128
ACTIVE DOWN
FTOS#show fcoe-map si
Fabric Name si
Fabric Id 1004
Vlan Id 1004
Vlan priority 3
FC-MAP 0efc04
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
Members
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show npiv devices
Display the FCoE and FC devices currently logged in to a Switch with the FC Flex IO module NPIV proxy
gateway.
Syntax
show npiv devices [brief]
Parameters
brief Displays an overview of current server CNA-fabric connections over a
switch with the FC Flex IO module NPIV proxy gateway.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the
FC Flex IO module.
Usage Information
Use the show npiv devices command to display information on the server CNA, server-
facing Ethernet and fabric-facing FC ports, and the SAN fabric in each server-fabric connection
over a switch with the FC Flex IO module NPIV proxy gateway.
1570
FC Flex IO Modules