CLI Guide

identify a 10G port that was in the same place in one of the
rear modules.
NOTE: You can identify stack port numbers by physical
inspection of the rear modules. The numbering is the
same as for the 10G ports. You can also inspect the
output of the show system stack-ports command.
unit 0-0 {counters
| details | ipmc-
replication | port-
stats [detail] |
register | table-
dump WORD}}
Enter the keyword unit then 0 for port-pipe 0, and then
enter one of the following keywords to troubleshoot errors
on the selected port-pipe and to give status on why a port is
not coming up to register level: counters, details,
ipmc-replication, port-stats [detail], register,
or table-dump WORD.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.8(0.0) Replaced the keyword port with interface.
9.4(0.0) Supported on the FN I/O Aggregator.
Example (data-
plane)
Dell#show hardware stack-unit 0 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :9798
noMhdr :0
noMbuf :0
noClus :0
recvd :9798
dropped :0
recvToNet :9778
rxError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
rxPkt(COS2) :25
rxPkt(COS3) :0
rxPkt(COS4) :0
rxPkt(COS5) :0
rxPkt(COS6) :0
rxPkt(COS7) :226
rxPkt(COS8) :9527
rxPkt(COS9) :0
rxPkt(COS10) :0
rxPkt(COS11) :20
rxPkt(UNIT0) :9798
transmitted :4353
Debugging and Diagnostics
1583