CLI Guide

show ip bgp neighbors
Allows you to view the information BGP neighbors exchange.
Syntax
show ip bgp [ipv4 unicast] neighbors [ip-address [advertised-
routes | dampened-routes | detail | flap-statistics | routes |
{received-routes [network [network-mask]]} | {denied-routes
[network [network-mask]]}]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view
only BGP information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to
view only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view
flap statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the
neighbor’s feasible routes.
received-routes
[network
[network-mask]
(OPTIONAL) Enter the keywords received-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
NOTE: Configure the neighbor soft-
reconfiguration inbound
command prior to
viewing all the information received from the neighbors.
denied-routes
[network
[network-mask]
(OPTIONAL) Enter the keywords denied-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied via neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
412
Border Gateway Protocol IPv4 (BGPv4)