Concept Guide

Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show interfaces transceiver command shown in the following example.
Line Description
Rx Power
measurement type
Output depends on the vendor, typically either “Average” or “OMA” (Receiver optical
modulation amplitude).
Temp High Alarm
threshold
Factory-dened setting, typically in Centigrade. Value diers between SFPs and SFP+.
Voltage High Alarm
threshold
Displays the interface index number used by SNMP to identify the interface.
Bias High Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
TX Power High
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
RX Power High
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Temp Low Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Voltage Low Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Bias Low Alarm
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
TX Power Low
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
RX Power Low
Alarm threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Temp High Warning
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Voltage High
Warning threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Bias High Warning
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
TX Power High
Warning threshold
Factory-dened setting. Value can dier between SFP and SFP+.
RX Power High
Warning threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Temp Low Warning
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Voltage Low
Warning threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Bias Low Warning
threshold
Factory-dened setting. Value can dier between SFP and SFP+.
Interfaces 571