Setup Guide

Table 2. System LED Displays

System LED LED Color/Display Description

Power

Green Power is being supplied to the

switch.

Off The switch does not have power.

Status

Blue The switch is operating normally as

a standalone switch or as a stack

master.

Off The switch is not the stack master.

Amber A fault has occurred or the switch

is booting.

NOTE: The front-end ports also contain LEDs that provide information about the link status and

traffic activity on a port.

NOTE: When the ingress air temperature exceeds 60°C, the Status LED turns amber and a major

alarm triggers.

Table 3. SFP+ Port LEDs

Port LED LED Color/Display Description

Link LED Off The port is down.

Solid green The port is up and can transmit

traffic at maximum speed. An SFP

+ port can transmit at 10G.

Solid amber The port is up and is transmitting

traffic at lower than maximum

speed. An SFP+ port is

transmitting at 1G.

Activity LED Off No traffic is being transmitted or

received on the port.

Blinking green Traffic is being transmitted or

received on the port.

Hardware Overview