Users Guide

SHA256
DellEMC# verify sha256 flash://file-name
Examples: Entering the Hash Value for Verication
MD5
DellEMC# verify md5 flash://file-name 275ceb73a4f3118e1d6bcf7d75753459
SHA256
DellEMC# verify sha256 flash://file-name
e6328c06faf814e6899ceead219afbf9360e986d692988023b749e6b2093e933
Deploying FN I/O Module
This section provides design and conguration guidance for deploying the Dell PowerEdge FN I/O Module (FN IOM).
By default the FN IOM is in Standalone Mode. It consists of the following default settings:
Mode
Default Settings
Chassis
Management
Controller
Conguration
Yes
Stacking and VLT Disabled
Data Center Bridging
Exchange Protocol
(DCBx)
Enabled
FIP Snooping Bridge
(FSB)
Enabled on FN 410S & FN 410T; Disabled on FN 2210S
NPIV Proxy Gateway
Mode (NPG)
Enabled in FN 2210S; Disabled on FN 410S & FN 410T
iSCSI Optimization Enabled
Broadcast Storm
Control
Enabled
Internet Group
Management
Protocol (IGMP)
Flood Restrict
Enabled
Network Time
Protocol (NTP)
Enabled
Enable and Disable
ports
All port enabled by default. Disable ports through Command Line Interface
Uplink Failure
Detection (UFD)
Enabled
TACACS+/RADIUS
(AAA Auth/Acct;
Auth coming up)
Disabled
DHCP Enabled n client only mode
Internet Group
Management
Enabled
62 Getting Started