Service Manual

show debugging
View a list of all enabled debugging processes.
Syntax
show debugging
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/3
ICMP packet debugging is on for
TenGigabitEthernet 0/3
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
Dell#
show environment
View system component status (for example, temperature or voltage).
Syntax
show environment [all | stack-unit unit-id]
Parameters
all Enter the keyword all to view all components.
stack-unit unit-id Enter the keyword stack-unit then the unit-id to display information on a specific
stack member. The range is from 0 to 5.
thermal sensor Enter the keywords thermal-sensor to view all components.
Command Modes
• EXEC
• EXEC Privildge
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following example shows the output of the show environment fan command as it appears prior to the
Dell Networking OS version 7.8.1.0.
Example (all)
Dell#show environment all
-- Unit Environment Status --
Unit Status Temp Voltage
--------------------------------
* 0 online 47C ok
100 Control and Monitoring