Service Manual

Parameters
percentage Enter the percentage assignment of weight to the class/queue. The range is from 1 to
100% (granularity 1%).
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given to all eight classes
exceeds 100%, the bandwidth percentage automatically scales down to 100%.
Related Commands qos-policy-output — creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies to each class.
Syntax
class-map {match-all | match-any} class-map-name [layer2]
Parameters
match-all Determines how packets are evaluated when multiple match criteria exist. Enter the
keywords match-all to determine that the packets must meet all the match criteria in
order to be a member of the class.
match-any Determines how packets are evaluated when multiple match criteria exist. Enter the
keywords match-any to determine that the packets must meet at least one of the
match criteria in order to be a member of the class.
class-map-name Enter a name of the class for the class map in a character format (32 character
maximum).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Packets arriving at the input interface are checked against the match criteria configured using this command to
determine if the packet belongs to that class. This command accesses CLASS-MAP mode, where the
configuration commands include thematch ip and match mac options.
1004 Quality of Service (QoS)