Service Manual

Related Commands
ip access-list extended — configures an extended IP ACL.
ip access-list standard — configures a standard IP ACL.
match ip access-group — configures the match criteria based on the access control list (ACL).
match ip precedence — identifies the IP precedence values as match criteria.
match ip dscp configures the match criteria based on the DSCP value.
match ip access-group — configures a match criterion for a class map based on the contents of the designated
MAC ACL.
match mac dot1p — configures a match criterion for a class map based on a dot1p value.
match mac vlan — configures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to different queues.
show qos class-map — views the current class map information.
clear qos statistics
Clears matched packets.
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
• For a 40-Gigabit Ethernet interface, enter the keyword FortyGigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you issue this command, statistical information stored regarding QoS clears and resets to 0. You can access
these statistics using the show qos statistics command in EXEC mode. When the traffic pattern matches
the QoS classification criteria flows, the corresponding counters increment.
Related Commands
show qos statistics — displays the QoS statistics.
Quality of Service (QoS) 1005