Service Manual

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information You can attach a single policy-map to one or more interfaces to specify the service-policy for those interfaces. A
policy map attached to an interface can be modified.
NOTE: The service-policy commands are not allowed on a port channel. The service-policy
input policy-map-name command and the service-class dynamic dot1p command are not
allowed simultaneously on an interface.
Related Commands policy-map-input — creates an input policy map.
service-policy output
Apply an output policy map to the selected interface.
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output policy-map-
name command.
Parameters
policy-map-name Enter the name for the policy map in character format (16 characters maximum). You can
identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A
policy map attached to an interface can be modified.
Related Commands
policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-map-
name] [qos-policy qos-policy-name] command.
Quality of Service (QoS) 1017