Service Manual

show qos class-map
View the current class map information.
Syntax
show qos class-map [class-name]
Parameters
class-name (Optional) Enter the name of a configured class map.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show qos class-map
Class-map match-any CM
Match ip access-group ACL
Related Commands class-map — identifies the class map.
show qos policy-map
View the QoS policy map information.
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary interface To view a policy map interface summary, enter the keyword summary and optionally one
of the following keywords and slot/port or number information:
• For a 40 Gigabit Ethernet interface, enter the keyword FortyGigabitEthernet
then the slot/port information.
•
For a 10 Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
detail interface To view a policy map interface in detail, enter the keyword detail and optionally one of
the following keywords and slot/port or number information:
• For a 40 Gigabit Ethernet interface, enter the keyword FortyGigabitEthernet
then the slot/port information.
•
For a 10 Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Defaults none
Command Modes
• EXEC
Quality of Service (QoS) 1019