Service Manual

Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_teng_y 467 4671
wred_teng_g 467 4671
wred_fortyg_y 467 4671
wred_fortyg_g 467 4671
test cam-usage
Checks the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit {[number | [all]}
Parameters
policy-map Enter the policy map name.
stack-unit number (OPTIONAL) Enter the keywords stack-unit then the stack-unit number.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all all to indicate all the stack-units.
Defaults none
Command Modes EXEC
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
This feature allows you to determine if the CAM has enough space available before applying the configuration on
an interface.
An input policy map with both Trust and Class-map configuration, the Class-map rules are ignored and only the
Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column contains the size of
the CAM space required for the Trust rule and not the Class-map rule.
The following describes the text cam-usage service-policy input policy-map linecard
command shown in the following example.
Field Description
stack-unit Indicates the line card slot number.
Portpipe Indicates the portpipe number.
1024 Quality of Service (QoS)