Service Manual

• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
database (OPTIONAL) Enter the keyword database to display messages when there is a change
to the RIP database.
events (OPTIONAL) Enter the keyword events to debug only RIP protocol changes.
trigger (OPTIONAL) Enter the keyword trigger to debug only RIP trigger extensions.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
default-information originate
Generate a default route for the RIP traffic.
Syntax
default-information originate [always] [metric metric-value] [route-map map-
name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to enable the switch software to always
advertise the default route.
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The range
is from 1 to 16. The default is 1.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a configured route-
map.
Defaults Disabled. Metric: 1.
Command Modes ROUTER RIP
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The default route must be present in the switch routing table for the default-information originate
command to take effect.
default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value, use this command with the
redistribute command.
Syntax
default-metric number
Routing Information Protocol (RIP) 1035