Service Manual

show memory
View current memory usage on the MXL switch.
Syntax
show memory [stack-unit 0–5]
Parameters
stack-unit 0–5 (OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack
member to display memory information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp is an
aggregate task that handles all the tasks running on the CPU.
Example
Dell#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
show processes cpu
Display CPU usage information based on processes running.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit 0–5 | summary |
ipc | memory [stack-unit 0–5]]
Parameters
management-unit
1-99 [details]
(OPTIONAL) Display processes running in the control processor. The 1-99 variable sets
the number of tasks to display in order of the highest CPU usage in the past five (5)
seconds. Add the keyword details to display all running processes (except sysdlp).
Refer to Example (management-unit).
stack-unit 0–5 (OPTIONAL) Enter the keyword stack-unit then the stack member ID. The range is
from 0 to 5.
As an option of the show processes cpu command, this option displays CPU usage
for the designated stack member. Or, as an option of
memory, this option limits the
output of memory statistics to the designated stack member. Refer to Example (stack-
unit).
summary (OPTIONAL) Enter the keyword summary to view the CPU utilization of processes
related to line card processing.
ipc (OPTIONAL) Enter the keyword ipc to display interprocess communication statistics.
Control and Monitoring 105