Service Manual

Parameters
commands level Enter the keyword commands then the command privilege level for command level
authorization.
role role-name Enter the keyword role then the role name.
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced the support for roles on the MXL 10/40GbE Switch .
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
aaa authorization role-only
Configure authentication to use the user’s role only when determining if access to commands is permitted.
Syntax
aaa authorization role-only
To return to the default setting, use the no aaa authentication role-only command.
Parameters
name Enter a text string for the name of the user up to 63 characters. It cannot be one of the
system defined roles (sysadmin, secadmin, netadmin, netoperator).
inherit existing-role-
name
Enter the inherit keyword then specify the system defined role to inherit permissions
from (sysadmin, secadmin, netadmin, netoperator).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
1074 Security