Service Manual

ip ssh connection-rate-limit
Configure the maximum number of incoming SSH connections per minute.
Syntax
ip ssh connection-rate-limit 1-10
Parameters
1-10 Enter the number of maximum numbers of incoming SSH connections allowed per
minute. The range is from 1 to 10 per minute. The default is 10 per minute.
Defaults 10 per minute
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication
enable command.
Parameters
enable Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you enable this command, clients can log in without a password prompt. This command provides two levels of
authentication:
• rhost-authentication is done with the file specified in the ip ssh rhostfile command.
• checking client host-keys is done with the file specified in the ip ssh pub-key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file) to configure host-
based authentication.
Related Commands
ip ssh pub-key-file — public keys of trusted hosts from a file.
1102 Security