Service Manual

volume rekey-
limit
Enter the keywords volume then the amount of volume in megabytes. The range is from
1 to 4096 to megabytes. The default is 1024 megabytes
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command Modes CONFIGURATION mode
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
ip ssh rhostsfile
Specify the rhost file used for host-based authorization.
Syntax
ip ssh rhostsfile {WORD}
Parameters
WORD Enter the rhost file name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#conf
Dell(conf)# ip ssh rhostsfile flash://shosts
Dell(conf)#
Usage Information
This command specifies the rhost file used for host-based authentication. This creates/ file overwrites the
flash:/ADMIN_DIR/ssh/shosts file and deletes the user-specified file. Even though this command is a
global configuration command, it does not appear in the running configuration because you only need to run this
command once.
This file contains hostnames and usernames, for which hosts and users, rhost-authentication can be allowed.
NOTE: For rhostfile and pub-key-file, the administrator must FTP the file to the switch.
1106 Security