Service Manual

show ip ssh rsa-authentication
Display the authorized-keys for the RSA authentication.
Syntax
show ip ssh rsa-authentication {my-authorized-keys}
Parameters
my-authorized-keys Display the RSA authorized keys.
Defaults none
Command Modes EXEC
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command displays the contents of the flash:/ADMIN_DIR/ssh/authorized-keys.username file.
Example
Dell#show ip ssh rsa-authentication
my-authorized-keys ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAyB17l4g
Fp4r2DRHIvMc1VZd0Sg5GQxRV1y
1X1JOMeO6Nd0WuYyzrQMM4qJAoBwtneOXfL
BcHF3V2hcMIqaZN+CRCnw/
zCMlnCf0+qVTd1oofsea5r09kS0xTp0CNfH
XZ3NuGCq9Ov33m9+U9tMwhS
8vy8AVxdH4x4km3c3t5Jvc=freedom@poclab4
Dell#
Related Commands ip ssh rsa-authentication (Config) — configures the RSA authorized keys.
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or all of the keywords.
mode mode Enter keyword then one of the following modes.
• configure
• exec
• interface
• line
• route-map
• router
Security 1113