Service Manual

Field Description
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell# show users
Authorization Mode: role or privilege
Line User Role Priv Host(s) Location
* 0 console 0 unassigned 1 idle
2 vty 0 admin unassigned 1 idle 10.16.127.35
3 vty 1 ad unassigned 15 idle 10.16.127.145
4 vty 2 ad1 sysadmin 1 idle 10.16.127.141
5 vty 3 ad1 sysadmin 1 idle 10.16.127.145
6 vty 4 admin unassigned 1 idle 10.16.127.141
7 vty 5 ad unassigned 15 idle 10.16.127.141
Dell#
Related Commands username — enables a user.
show userroles
Display information on all defined user roles.
Syntax
show userroles
Example
Dell# show userroles
Role Inheritance Modes
netoperator Exec
netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
secadmin Exec Config
sysadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
netoperator
testadmin netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Example
Dell# show userroles
Role Inheritance Modes
netoperator Exec
netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
Security 1115