Service Manual

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands clear ip dhcp snooping — clears the contents of the DHCP binding table.
secure-cli enable
Enable the secured CLI mode.
Syntax
secure-cli enable
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced this command.
Usage Information
The secured CLI mode prevents the users from enhancing the permissions or promoting the privilege levels. After
entering the command, save the running-configuration.
Once you save the running-configuration, the secured CLI mode is enabled. If you do not want to enter the
secured mode, do not save the running-configuration.
Once saved, to disable the secured CLI mode, you need to manually edit the startup-configuration file and reboot
the system.
username
Establish an authentication system based on user names.
Syntax
username name [access-class access-list-name] [nopassword | {password | secret
| sha256-password} [encryption-type] password] [privilege level] [role role-
name]
If you do not want a specific user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name Enter a text string for the name of the user up to 63 characters.
access-class
access-list-name
Enter the keywords access-class then the name of a configured access control list
(either an IP access control list or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user should not enter a password.
password Enter the keyword password then the encryption-type or the password.
secret Enter the keyword secret then the encryption-type or the password.
Security 1121