Service Manual

show system stack-ports — Displays information about the stack ports on all switches in the stack.
show hardware stack-unit — Displays the data plane and management plane input and output statistics of a
particular stack member.
stack-unit priority — Configures the ability of the switch to become the management unit of a stack.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking OS technical support to perform troubleshooting
on MXL switches.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the stack
member designated by unit-id. The range is 0 to 7.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press ENTER to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. For details about filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output. flash: Save to local flash drive
(flash://filename [max 20 chars] ).
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Without the page or stack-unit option, the command output is continuous. Use Ctrl-z to interrupt the
command output.
The save option works with other filtering commands. This allows you to save specific information of a show
command. The save entry must always be the last option. For example: Dell#show tech-support |grep
regular-expression |except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed when you execute one of the
following show commands:
• show cam
• show clock
• show environment
• show file
• show interfaces
• show inventory
• show ip protocols
• show ip route summary
114 Control and Monitoring