Service Manual

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage Information
This command is available with or without RBAC enabled. When RBAC is enabled you can restrict access to audit
and security logs based on the CLI sessions’ user roles. If extended logging is disabled, you can only view system
events, regardless of RBAC user role.
When you enabled RBAC and extended logging:
• Only the system administrator role can execute this command.
• The system administrator and system security administrator roles can view security events and system events.
• The system administrator role can view audit, security, and system events.
• The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related Commands
• show logging auditlog — display the audit log.
• clear logging auditlog— clear the audit log.
default logging monitor
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
logging monitor — sets the logging monitor parameters.
terminal monitor — sends system messages to the terminal/monitor.
1156 Simple Network Management Protocol (SNMP) and Syslog