Service Manual

logging buffered
Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer.
Syntax
logging buffered [level] [size]
To return to the default values, use the default logging buffered command.
To disable logging stored to an internal buffer, use the no logging buffered command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 7 or debugging.
size (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages
buffered depends on the size of each message. The range is from 40960 to 524288. The
default is 40960 bytes.
Defaults level = 7; size = 40960 bytes
Command Modes CONFIGURATION
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size does not
affect messages stored in the buffer.
Related Commands
clear logging — clears the logging buffer.
default logging buffered — returns the logging buffered parameters to the default setting.
show logging — displays the logging setting and system messages in the internal buffer.
logging console
Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 7 or debugging.
Defaults level = 7; size = debugging
Command Modes CONFIGURATION
1158 Simple Network Management Protocol (SNMP) and Syslog