Service Manual

Stacking

For more information about using the Switch stacking feature, see the Stacking MXL 10/40GbE Switches chapter in the Dell Networking

OS Configuration Guide.

NOTE: The terms stack-unit-id, unit-id, stack-unit-number, stack-number, and unit-number mentioned

in this chapter refers to the stack-unit-number.

Topics:

• redundancy disable-auto-reboot

• redundancy force-failover stack-unit

• reset stack-unit

• show redundancy

• show system stack-ports

• show system stack-unit stack-group

• stack-unit stack-group

• stack-unit priority

• stack-unit provision

• stack-unit renumber

redundancy disable-auto-reboot

Prevent the switch stack management unit from rebooting if it fail.

Syntax

redundancy disable-auto-reboot stack-unit [0–5 | members]

To return to the default, use the no redundancy disable-auto-reboot stack-unit [0–5 |

members] command.

Defaults Disabled (the failed switch is automatically rebooted).

Command Modes CONFIGURATION

Command History

Version Description

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

When the command is given as redundancy disable-auto-reboot stack-unit, it prevents the switch

stack management unit and standby unit from rebooting if they fail.

When a particular unit number in the range from 0 to 5 is issued as part of the CLI, it prevents that particular unit

from rebooting after failure.

When members are issued as part of the CLI, all the units part of the stack are prevented from rebooting after

failure.

1168 Stacking