Service Manual

• For a Loopback interface, enter the keyword loopback then a number from zero
(0) to 16383.
• For the Null interface, enter the keyword null then 0.
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
terminal xml
Enable XML mode in Telnet and SSH client sessions.
Syntax
terminal xml
To exit XML mode, use the terminal no xml command.
Defaults Disabled
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command enables the XML input mode where you can either cut and paste XML requests or enter the XML
requests line-by-line. For more information about using the XML feature, refer to the XML chapter in the Dell
Networking OS Configuration Guide.
traceroute
View a packet’s path to a specific device.
Syntax
traceroute {host | ip-address}
Parameters
host Enter the name of device.
Control and Monitoring 117