Service Manual

Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• reload — reboots the system.
• show system — displays the current status of all stack members or a specific member.
stack-unit stack-group
Configure a 40GbE port for stacking mode.
Syntax
stack-unit unit number stack-group group number
Parameters
unit number <0–5> Number of the member stack unit. The valid values are from 0 to 5.
group number <0–
5>
Number of the stacked port on the unit. The valid values are from 0 to 5.
Command Modes CONFIGURATION
Command History
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• reload — reboots the system.
• show system — displays the current status of all stack members or a specific member.
• show system stack-unit stack-group displays the stack-groups present/configured for a MXL 10/40GbE
switch stack unit
stack-unit priority
Configure the ability of switch to become the management unit of a stack.
Syntax
stack-unit 0–5 priority 1-14
Parameters
0–5 Enter the stack member unit identifier, from 0 to 5, of the switch on which you want to
set the management priority.
1–14 This preference parameter allows you to specify the management priority of one backup
switch over another, with 1 the lowest priority and 14 the highest.
The switch with the highest priority value will be chosen to become the management
unit.
Defaults 0
Command Modes CONFIGURATION
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Stacking 1173