Service Manual

Related Commands
• reload — reboots the system.
• show system — displays the status of all stack members or a specific member.
stack-unit provision
Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the management unit.
Syntax
stack-unit 0–5] provision {MXL-10/40GbE}
Parameters
0–5 Enter a stack member identifier, from 0 to 5, of the switch that you want to add to the
stack.
MXL-10/40GbE Enter the model identifier of the switch to be added as a stack member. This identifier is
also referred to as the provision type.
Command Modes CONFIGURATION
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
• reload — reboots the system.
• show system — displays the status of all stack members or a specific member.
stack-unit renumber
Change the stack member ID of any stack member or a stand-alone unit.
Syntax
stack-unit stack-unit-number renumber stack-unit-number
Parameters
stack-unit-number The first instance of this value is the stack member unit identifier, from 0 to 5, of the
switch that you want add to the stack. The range is from 0 to 5.
The second instance of this value is the desired new unit identifier number.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
You can renumber any switch, including the management unit or a stand-alone unit.
You cannot renumber a unit to a number of an active member in the stack.
When executing this command on the master, the stack reloads. When the members are renumbered, only that
specific unit is reset and comes up with the new unit number.
1174 Stacking