Service Manual

To disable storm control for unknown-unicast traffic, use the no storm-control unknown-unicast

[packets_per_second in] command.

Parameters

packets_per_secon

Enter the packets per second of broadcast traffic allowed into the network. The range is

from 0 to 33554368.

Defaults none

Command Modes CONFIGURATION

Command History

Version Description

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information Unknown Unicast Storm-Control is valid for Layer 2 and Layer 2/Layer 3 interfaces.

storm-control unknown-unicast (Interface)

Configure percentage of unknown-unicast traffic allowed on the switch interface (ingress only).

Syntax

storm-control unknown-unicast [packets_per_second in]

To disable unknown-unicast storm control on the interface, use the no storm-control unknown-unicast