Service Manual

• dot1x port-control
• dot1x quiet-period
• dot1x reauthentication
• dot1x reauth-max
• dot1x server-timeout
• dot1x supplicant-timeout
• dot1x tx-period
• mac
• show dot1x cos-mapping interface
• show dot1x interface
• show dot1x profile
debug dot1x
Display 802.1X debugging information.
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu] [interface
interface]
Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface interface Restricts the debugging information to an interface.
Defaults Disabled
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
dot1x auth-fail-vlan
Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
To delete the authentication failure VLAN, use the no dot1x auth-fail-vlan vlan-id [max-
attempts number] command.
Parameters
vlan-id Enter the VLAN Identifier. The range is from 1 to 4094.
max-attempts
number
(OPTIONAL) Enter the keywords max-attempts followed number of attempts desired
before authentication fails. The range is from 1 to 5. The default is 3.
802.1X 121