Service Manual

end-day Enter the weekday name that you want daylight saving time to end. Enter the weekdays
using the three letter abbreviations; for example Sun, Sat, Mon, and so on. The range is
from Sun to Sat.
end-month Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format;
example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the summer-time period. The
range is from 1 to 1440. The default is 60 minutes.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN MXL.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
clock summer-time date — sets a date (and time zone) on which to convert the switch to daylight saving time on
a one-time basis.
show clock — displays the current clock settings.
clock timezone
Configure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to universal time
coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number of hours.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the FN MXL.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, include the differentiator between
UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of -8.
1216 System Time and Date