Manualshelf

Service Manual

ManualsBrandsDell ManualsserversDell Force10 MXL Blade
1211121212131214121512161217121812191220
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ntp disable
Prevent an interface from receiving NTP packets.
Syntax
ntp disable
To re-enable NTP on an interface, use the no ntp disable command.
Defaults Disabled (that is, if you configure an NTP host, all interfaces receive NTP packets)
Command Modes INTERFACE
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ntp multicast client
To receive NTP information from the network via multicast, configure the switch.
Syntax
ntp multicast client [multicast-address]
To disable multicast reception, use the no ntp multicast client [multicast-address] command.
Parameters
multicast-address (OPTIONAL) Enter a multicast address. Enter either an IPv4 address in dotted decimal
format. If you do not enter a multicast address, the address 224.0.1.1 is configured if the
interface address is IPv4.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ntp master <stratum>
Configure the switch as NTP Server.
Syntax
ntp master <stratum>
Parameters
ntp
master<stratum>
Enter the keyword stratum number to identify the NTP Server's hierarchy.
Defaults Not configured.
System Time and Date 1219