Service Manual

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ntp trusted-key
Set a key to authenticate the system to which NTP synchronizes.
Syntax
ntp trusted-key number
To delete the key, use the no ntp trusted-key number command.
Parameters
number Enter a number as the trusted key ID. The range is from 1 to 4294967295.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The number parameter in the ntp trusted-key command must be the same number as the number
parameter in the ntp authentication-key command. If you change the ntp authentication-key
command, you must also change the ntp trusted-key command.
Related Commands
ntp authentication-key — sets an authentication key for NTP.
ntp authenticate — enables the NTP authentication parameters you set.
show clock
Display the current clock settings.
Syntax
show clock [detail]
Parameters
detail (OPTIONAL) Enter the keyword detail to view the source information of the clock.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the FN MXL.
8.3.16.1 Introduced the MXL 10/40GbE Switch IO Module.
Example
Dell#show clock
12:30:04.402 pacific Tue May 22 2012
Dell#
Example (Detail)
Dell#show clock detail
12:30:26.892 pacific Tue May 22 2012
1222 System Time and Date