Service Manual

192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related Commands show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
show ntp status
Display the current NTP status.
Syntax
show ntp status
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ntp status command shown in the following example.
Field Description
“Clock is...” States whether the switch clock is synchronized, which NTP stratum the system is
assigned and the IP address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in
this system.
“reference time
is...”
Displays the reference time stamp.
“clock offset is...” Displays the system offset to the synchronized peer and the time delay on the path to
the NTP root clock.
1224 System Time and Date