Manualshelf

Service Manual

ManualsBrandsDell ManualsserversDell Force10 MXL Blade
1231123212331234123512361237123812391240
Defaults No password is configured. level = 15.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–ON,
S4048–ON, MXL, FN IOM, C9010, S3100, and Z9100-ON.
Related Commands
• show running-config — views the current configuration.
• privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.
ignore startup config
Ignore the system startup configuration.
Syntax
ignore startup-config
Command Modes uBoot
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
interface management ethernet ip address
Set the management port IP address and mask.
Syntax
interface management ethernet ip address <ip/mask>
Command Modes uBoot
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
no default-gateway
Clear the default gateway IP address.
Syntax
no default-gateway
Command Modes uBoot
Command History
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
u-Boot 1237